Gas Appliance Repair for Ranges, Ovens, and Dryers

Safe and certified repair for gas-powered appliances including ranges, ovens, dryers, and cooktops with ignition failures, gas supply issues, or pilot light problems. Our technicians are trained in gas line safety and ensure every repair meets local safety codes.

A burner that won't light or a dryer that runs cold are common calls. Gas appliances fail in specific, identifiable ways, and most repairs come down to the igniter, the gas valve, or the burner assembly.

Common problems we fix

  • Burner clicks but won't light — The igniter is sparking but the burner isn't catching. The most common causes are a clogged burner port or a wet igniter. Food debris blocking the burner orifice is the fix more often than a parts failure.
  • Oven won't heat even though burner lights — On a gas oven, this usually means a failed bake igniter. The igniter glows but can't draw enough current to open the safety gas valve, so the burner never fires.
  • Gas dryer runs but produces no heat — A no-heat dryer almost always points to the igniter, the thermal fuse, or the gas valve coils. The drum turns, but the burner assembly never fires. All three parts are testable.
  • Smell gas near the appliance — Turn off the appliance and ventilate the area. A gas smell at the appliance often means a faulty gas valve, a cracked burner, or a loose connection. This should not be used until inspected.

What Causes Most Gas Ignition Failures

Igniters are the most commonly replaced part on gas ovens. They weaken over time and lose the ability to draw enough current to open the safety valve, even though they still glow. Burner igniters on cooktops fail differently: they get contaminated with food spills or moisture, which interrupts the spark path. The fix for a weak oven igniter is replacement. The fix for a contaminated surface burner igniter is often just cleaning the igniter and burner cap thoroughly.

  • Oven igniter glows orange but burner never lights: igniter has lost current draw
  • Igniter clicks rapidly on one burner only: contamination on that igniter or cap
  • Clicking continues after burner lights: moisture inside the igniter module
  • No click at all from a surface burner: failed spark module or broken wire

Gas Appliance Safety in a Gulf Coast Climate

Salt air and humidity affect gas appliances the same way they affect everything else near the coast. Burner orifices and gas valve ports can corrode, restricting flow and causing uneven flames or ignition problems. Homes on Siesta Key, Longboat Key, or near Venice Beach see this more often than inland properties. Flexible gas connectors behind ranges and dryers should be checked periodically for corrosion, especially in older homes where the connector hasn't been replaced in years.

When a Gas Appliance Needs Parts vs. Cleaning

Not every gas repair involves a new part. Burner ports clog with grease and food debris and can be cleared without replacing anything. Pilot orifices on older appliances block the same way. If cleaning doesn't restore function, the next step is testing the igniter, thermocouple, or gas valve to confirm which component has actually failed. Replacing parts without testing first is how repair bills get inflated unnecessarily.

Is it safe to use a gas appliance that has an ignition problem?
If the appliance is lighting manually and there is no gas smell, the risk is lower, but an ignition fault should still be diagnosed. If you smell gas, stop using it and get it checked before relighting.
Why does my gas oven igniter glow but the oven never heats?
A glowing igniter that can't open the gas valve has weakened below the current threshold needed to trigger the safety valve. The igniter needs to be replaced, not just cleaned.
Can gas dryer repairs be done safely in the home?
Yes. Gas dryer repairs on the burner assembly, igniter, thermal fuse, and valve coils are done at the appliance itself. The gas supply line is shut off at the valve during the repair.
One burner on my cooktop works fine but the others don't ignite. What does that mean?
On most cooktops, each burner has its own igniter. A single working burner rules out the spark module and points to contamination or a failed igniter on the specific burners that won't light.
How do I know if a gas appliance problem is the appliance or the gas supply line?
If no gas appliances in the home are working, check whether the main gas supply is on. If only one appliance is affected, the problem is almost certainly in the appliance itself, not the supply line.

Book your gas appliance repair service today

Fast response, upfront pricing, satisfaction guaranteed.